•  
  • Technology

    Your present location:Home >> Ni-Cd Battery Characteristics

    Ni-Cd Battery Characteristics

    Cell Construction
    1     Cell cap (+)
    2     Gasket
    3     Current Collector
    4     Cell Can (-)
    5     Bottom Insulator Flake                 
    6     Safety Vent
    7     Top Insulator Flake
    8     Separator
    9     Anode- Nickel Electrode
    10  Cathode- Cadmium Electrode
     
    Major Features
    Cost effective, Reliable safety vent system, Long service life,
    Wide temperature range, Excellent permanent charge endurance 
     
    Major Applications
    Lighting:                        Emergency lighting, Solar light, Flashlight
    Toys:                              R/C cars, Racing cars, R/C ships
    Communications:       Cordless telephone, Two-way radios
    Electric Tools:              Electric Screwdrivers, Auto-mower, Portable vacuum cleaners
    Audiovisual Devices:  Camera, MP3/MP4, Remote control, Portable DVD
    Other Applications:      Shavers, Access controller, and so on

     
    General Characteristics of Nickel Cadmium Batteries

    Charge characteristics
    During charging, the cell voltage of NiCd batteries increases as charging proceeds. It then decreases slightly in the final stage due to heat generation within the cell, eventually reaching an equilibrium. The cell voltage varies widely according to the ambient temperature.
    Standard charge    0.1C for 16 hours
    Quick charge      0.3C for 4.5 hours
    Fast charge        1C for 1.3 hours with –△V or dT/dt controlled




    Discharge characteristics

    The operating voltage of NiCd batteries varies slightly depending on the discharge current. It is maintained at approximately 1.2V for above 80% of the discharge period.
    Standard series cells can withstand a high rate discharge up to 3C.



    Cycle characteristics

    Under normal usage conditions, NiCd batteries can withstand over 500 charge/discharge cycles according to IEC criterion. Even under 1C charge/discharge conditions in the accelerating cycle procedure, it can also be expected to provide more than 400 charge/discharge cycles.  



    Temperature characteristics

    NiCd batteries can be used over a vide temperature range. As cell characteristics vary slightly depending on the temperature, in order to obtain optimum performance, the cell should be handled within the specified temperature.
    Standard charge      0~45℃
    Fast charge         10~40℃
    Discharge          -20~60℃



    Storage characteristics

    With NiCd batteries, self-discharge accelerates as the temperature increase. However the cell capacity decreased through discharging during storage can be restored to its original level by recharging. But in order to minimize the deterioration in battery performance, the cells should be stored at -20~35℃(for long periods).